WE HAVE STOCK!!!!! Yay!!
We have the following colors in stock ready to ship:
Matte Black - XXL, XL, L, M,
Charcoal - XL, M, S
Tactical Green -XXL, XL, M
White - XL, L
Dark Blue -XL, L
Royal Blue - XL
Red- XL, L
**COMING SOON** The following colors/sizes are on order and will be arriving soon!
Matte Black- XXL, XL, L
Tactical Green-XL, L
More colors and sizing coming!
Please read info at the bottom of this message regarding pre-order information.
Initial G4 helmet orders will be limited to the following matte colour choices: black, white, dark blue, red, charcoal, tactical green, royal blue and lime green. We anticipate the other five color options—electric blue, orange, purple, yellow and pink—will be available for purchase in late July/Early August and ship late August/Early September
Fitting a Camera to the new G4
The G4 Helmet is certified to a Skydiving and Wind Tunnel Helmet Standard. To achieve this standard, helmets must pass Impact and Snag Resistance testing. While our G3 Roller mount base is a good fit against the top surface of the G4, it was not tested according to the XP S 72-600 Standard. We believe that having a Roller Mount fitted to the G4 helmet would forgo the Snag Test in this standard. It is up to the user to decide whether to mount a camera to our G4 helmet knowing that by doing so, it could affect the way the helmet performs when tested to the XP S 72-600 Standard.
X-Small: 53-54cm 20 1/2-21 1/4"
Small: 55-56cm 21 1/2"-22"
Medium: 56-57cm 22-22 1/2"
Large: 57-58cm 22 1/2-22 3/4"
X-Large: 59-60cm 23 1/4-23 1/4"
XX-Large: 61-62cm 24-24 1/2"
Differences between the G3 and G4
- Certified to XP S 72-600
- Same superior viewing area
- Better internal design for a better fit
- Easier fitting of audible altimeters
- The back offers more coverage for protection
- More protection around the temple area as the visor mechanism is also thinner
- The mechanism is similar in operation but designed to offer no maintenance
- A lot quieter as it seals better in all areas and the exterior shape is sleek and smooth by design
- No glue holding the chin curtain in place
- Cooler due to the ventilation design
- Ventilation control can be adjusted by the user
- One visor fits all G4 helmets sizes
The liner is removable through a process. We will create a short how-to video on removing the liner. The adjustment of the neck skirt is the same as the G3, although we located the adjustment end in an easier place to facilitate this.
G4 Ventilation Control
The internal EPP foam has been styled to create channels within the helmet to provide ventilation. The top padding also has breathable material to allow the hot air to be drawn into these channels.
The chin bar actuators can control the airflow to your mouth area as well as direct to the inner surface of the visor.
Two rear ventilation ports allow the evacuation of this hot air from within the helmet.
One visor fits all the G4 helmet sizes. Visors have an anti-fog inside and anti-scratch outside. We offer a tinted and blue mirrored visor option. Our G4 visor is tested for its optical qualities, and as such it has been certified and carries a CE mark.
The visor is very simple to remove. Undo the two side plates screws on both side of the visor. Remove these plates and slide the visor forward. Our tinted and mirrored visors are certified to Category 2 against ISO 12312-1:2013.
G4 Side Plates
You can accessorize your G4 helmet with many of our side plate color and engraving options.
With a larger foot print, you can add your own custom engraving.
By purchasing the G4 that is not in stock (listed above), you are confirming you are okay with the extended lead time. G4's are expected to ship out 4-6 weeks after order (if not already on preorder through us). Your card will be charged at time of purchase. If you choose to cancel your order before your item ships, you will incur a 6.5% return processing fee.