The Cookie Multi-Tool carries the correct bit load to fit the majority of Cookie Helmet and Camera Accessories.
Here is the Bit Load List:
- 1/8 Hex
- 5/64 Hex
- 3/32 Hex
- 7/64 Hex
- 5/32 Hex
- Phillips-Star Screwdriver
For Roller Mount owners: Unfortunately the shaft is too large to fit into the Roller Mount Center, so you will need to keep your 5/32 Hex wrench on hand to remove the Go Pro Case from the Roller Mount center.
G3 Spring Kit
The Spring Kit supplies the items you require to change the visor locking springs on your G3 helmet. Included are 6 replacements springs (note that only 1 each side is needed, leaving you with spares). As well as 2 replacement screws for the center of each mechanism.
GoPro WiFi Arm Band
The Cookie WiFi Arm Band is a simple method of attaching the Go Pro WiFi controller to skydivers' arms. This WiFi arm band was designed to stop the dreaded "Is my camera ON" look that generally occurs for most opening scenes filmed before exit, while also giving you access to the charging port and charging port release button.
Medium: arm circumferences 160mm
Large: arm circumferences 200mm
X-Large: arm circumferences 240mm
These arm bands are best worn on the forearm. Remember to measure your arm with your jump suite on!
G3 Aluminum Side Plates
The new Cookie Aluminium Side Plate is made with a hi-grade aluminum core and a hi-performance polymer frame. The upgrade provides extra grip when opening your visor, and also keeps your local tunnel's walls scratch free. Choose from nine different colors and four designs options (G3, Loop, Cookie, Camo). Cost is per pair.
G3 FlySight Mount
The FlySight Mount is designed to fit perfectly on the G3 helmet. Provides a snug fit for the FlySight GPS unit without any glue or Velcro for better security.
Cookie GoPro Block
The GoPro Block is a simple alternative to the adhesive based mount that ships with the GoPro range of cameras. The GoPro Block will mount to any flat surface using the tripod screw provided. The Block is also designed to mount directly to the standard Hand Mount.
Cookie Helmet Bag
The Cookie Helmet bag is made from cordura and provides protection for your full-face helmet, complete with hard base and carry handle. You'll be able to fit your G3, as well as carrying other items such as gloves, altimeters and wallet, etc.
High Impact Polycarbonate treated with anti-fog coating on the inside and anti-scratch on the outside. This G3 Visor has been designed to comply with motorcycle standard optical requirements. Available in clear or tint.
The Sony Sleeve allows you to side mount the Sony Action Cam AS10 and AS15 to any flat surface. Additionally the Sleeve has a slotted hole allowing rotation to your required angle and comes complete with mounting hardware. Able to be mounted directly to your G3 and also fits the Fuel with an additional required part - the Flat Side Mount.
The Cookie Cube is a sturdy camera bag and skydiving helmet bag designed to carry all your camera gear.
- Room for you camera helmet
- Room for your Still camera
- Adjustable compartments
- Pockets for camera cables and chargers
- Hard base and side with molded handle
- Perfect as aircraft hand luggage
- Size 40cm x 25cm x 24cm
G3 Service Kit
Included in the G3 Service Kit:
- 1 Clear Visor
- 6 replacement Springs
- 2 replacement center mechanism screws
- 6 replacement Side Plate screws
The Cookie skydiving camera hand mount offers a range of features ideal for small-format camera users. The camera is easily rotated, but stays locked in place using a unique graduated adjustment that can be rotated while on the fly. Included is a frictional rotating disc that allows the user to more easily rotate to an infinite angle choice. Setups include: Sony Action Cam and Drift as standard. Adding the Aluminium GoPro Hand Mount Adaptor gives you a setup ideal for the Hero2, 3, 3+ or 4 and the Contour Mount allows you to mount the contour range of cameras.
G3 Roller Mount
The Cookie G3 Roller Mount is machined from billet aluminum and designed to reduce the risk of snagging. This mount keeps the camera in place while providing 75 degrees of angle adjustment. Available for GoPro Hero2, GoPro Hero3 and GoPro Hero3+ cameras. Note that the GoPro 3 and 3+ fit into the same Roller Mount.
The Go Pro 4 will fit into the 3+ Roller Mount
The Flatlock Camera mount allows you to easiliy and quickly top mount a camera to your helmet. You can use this in conjunction with the Fuel helmet by adding the Fuel Flatlock adaptor. The Flatlock can also be mounted to any flat surface.
Machined from billet aluminum and designed to reduce the risk of snagging, this mount keeps the camera in place while providing 90 degrees of angle adjustment. This system allows for a secure and adjustable mounting solution for the Hero4 Session. The kit includes the Hero4 Session aluminum parts, both Fuel and G3 mounting bases and the Cookie Multi Tool. It's all you need to jump the Session on both your G3 and Fuel helmets.